Loading Motions

Option 1

1. Select File →Load Motion… from the OpenSim main menu bar. 
2. In the window that appears, locate and select the desired motion file, and then click Open. 
3. After loading a motion, its name will appear in the motion textbox, located on the toolbar. 

Option 2

As with models, you can also load motions by dragging a motion file from the Windows Explorer and dropping it into the application. TODO Describe where drop operation is allowed.

Option 3

You can also load a motion by Right Clicking on the current model in the Navigator Window and choosing Load Motion... from the drop down menu that appears.

You can find the motions associated with a model in the Navigator window:

A new branch titled the name of the file just loaded will appear in the Navigator titled Motions. 

Expand the Motions branch by clicking the buttons to the left of the Navigator to expand or collapse to see all motions loaded for a particular model.

If you have multiple models loaded, you can sync their loaded motions (e.g. to compare Inverse Kinematics results with the output of the Residual Reduction Algorithm).

1. Expand the Motions branch for each model. Select the motion for each model using Control + Left Click on the PC and Command + Left Click on the MAC. This will highlight both motions.
2. OpenSim will match the times stamps of the motions. So when you hit the Play button in the toolbar, the models will be animated with their respective motions.

1. Expand the Motions branch in the Navigator. 

2. Right mouse click on the desired motion and select Close.