WELCOME TO THE NEW PLATFORM FOR THE OPENSIM DOCUMENTATION

Remember to update your bookmarks with our new URL.
If you find missing content or broken links, let us know: opensim@stanford.edu


How to Use the RRA Tool

The topics covered in this section include:

How to Use the GUI

The computed muscle control tool is accessed by selecting Tools → Reduce Residuals … from the OpenSim menu. The RRA Tool is governed by three tabs: 

  • The Main Settings pane is used to specify the input kinematics, tracking tasks, and control constraints as well as the time range for the analysis, and the output of the results.

  • The External Loads pane is used to specify parameters relating to the external loads applied to the model during the analysis.

  • The Integrator Settings pane is described more in Settings Files and XML Tag Definitions.

 

Figure: Window for the RRA Tool. The residual reduction tool window has three panes. The Main Settings pane is shown here; there are other tabs for describing additional actuators (residual and reserve) to be used and integrator settings for forward dynamics simulation (as described in How to Use the Forward Dynamics Tool).

The Control Panel

At the bottom of all the Tool dialog windows are four buttons, located in what we call the Control Panel.

  • The Load and Save buttons are used to load or save settings for the tool. 
  • The Run button starts execution. 
  • The Close button closes the window.
  • The Help button takes you to the relevant section of the User Guide.

Note that the Close button can be clicked immediately after execution has begun; the execution will complete even though the window has been closed.

 

  • If you click Load…, you will be presented with a file browser that displays all files ending with the .xml suffix. You may browse for an appropriate settings file (e.g., subject01_Forward_Setup.xml or subject01_Scale_Setup.xml)) and click Open. The tool will then be populated with the settings in that setup file.
  • If you have manually entered or modified settings, you may save those settings to a file for future use. If you click Save…, a Save dialog box will come up in which you can specify the name of the settings file. The name you specify for the file should have a suffix of .xml. Click Save to save the settings to file.
  • After you click Save, you may be presented with another dialog box that asks you whether or not you would like to save some of the settings to separate external files. This can be useful if you would like to reuse those settings for other trials or subjects. Check the boxes of the settings that you'd like to save to external files and specify the names of these files. All of these files should have a suffix of .xml.

Configuring the RRATool

To configure the RRATool, check Adjust model and specify a body to adjust. Specifically, RRA will compute the average residual forces that were necessary for tracking and use these values to change the center of mass location of the body specified and recommend mass adjustments. Secondly, kinematics are tracked (according to the task weightings) and experimental accelerations are not imposed as constraints.

Replacing Model Actuators

Critical to RRA is the replacement of muscles with just one ideal actuator per coordinate. In the gait2354_simbody example, these correspond to residuals for the pelvis' six degrees of freedom and reserves for all other model internal coordinates (joint angles). Under the Actuators and External Loads tab, you would load the gait2354_RRA_Actuators.xml file and select Replace model's force set (the only option).

Command-line Execution

RRA uses the command rra -S <setup file name>, for example, 

rra -S subject01_Setup_RRA.xml

OpenSim is supported by the Mobilize Center , an NIH Biomedical Technology Resource Center (grant P41 EB027060); the Restore Center , an NIH-funded Medical Rehabilitation Research Resource Network Center (grant P2C HD101913); and the Wu Tsai Human Performance Alliance through the Joe and Clara Tsai Foundation. See the People page for a list of the many people who have contributed to the OpenSim project over the years. ©2010-2024 OpenSim. All rights reserved.