_Inverse Dynamics Best Practices

Owned by Jennifer Hicks
Aug 16, 2012
1 min read
  1. Filter your raw coordinate data, since noise is amplified by differentiation. Without filtering, the calculated forces and torques will be very noisy.
  2. Compare your results to data reported in the literature. Your results should be within one standard deviation of reported values.
  3. Inspect results from Inverse Dynamics to check whether ground reaction forces were applied correctly or not. Are there large and unexpected forces at the pelvis? For gait, applying ground reaction forces should help reduce the forces computed by Inverse Dynamics at the pelvis.
  4. See How Inverse Dynamics Works and How to Use the Inverse Dynamics Tool for more information about using the Inverse Dynamics Tool.

OpenSim is supported by the Mobilize Center , an NIH Biomedical Technology Resource Center (grant P41 EB027060); the Restore Center , an NIH-funded Medical Rehabilitation Research Resource Network Center (grant P2C HD101913); and the Wu Tsai Human Performance Alliance through the Joe and Clara Tsai Foundation. See the People page for a list of the many people who have contributed to the OpenSim project over the years. ©2010-2024 OpenSim. All rights reserved.