GAMMA workshop 2019

Owned by james
Last updated: Mar 28, 2024 by Henry Kwong
2 min read

Organizers

Hans Kainz (University of Vienna, Austria and KU Leuven, Belgium)
Maarten Afschrift (KU Leuven, Belgium)
Ursula Trinler (BGU Ludwigshafen, Germany)

Date and place

9. November 2019, FH Campus Wien, Favoritenstraße 226, 1100 Vienna, Austria
http://www.g-a-m-m-a.org/index.php/fortbildungen1/workshopankuendigungen/108-gamma-workshop-wien-november-2019

General information

The GAMMA (Gesellschaft für die Analyse Menschlicher Motorik in ihrer klinischen Anwendung, http://www.g-a-m-m-a.org) society focus on the clinical applications of 3D gait analysis. During this workshop the participants will learn how to use the OpenSim GUI for a typical data processing workflow. This workshop follows a similar workflow and uses the same example data as a previous OpenSim workshop (ESB 2017).


Preparing for the workshop

Participants should bring a laptop with OpenSim 4.0 installed or be prepared to team up with other participants. OpenSim model files and setup files are written in xml. Notepad++ is a free text editor that makes it easier to view and edit xml files.  During the workshop we will use Notepad++ to examine OpenSim files. Hence, please download and install following software prior to the workshop.


Agenda

Each point on the agenda will start with a short introduction talk from the organizers (5 to 10 minutes). Afterwards the participants can try to do each step on their laptop for approximately 20 minutes. The organizers will support the participants during the hands-on sessions.
To complete the tutorial please download data and setup files. For your reference, we also provide the output files.

Additional geometry files. Please copy this folder to your 'data and setup files' folder.

The slides from the Introductory talks to each topic can be downloaded with the following link: Slides

 

Introduction

9:00 - 9:30

Importing data

9:30 – 9:40

Scaling

9:40 – 10:10

Inverse kinematics  

10:10 – 10:45

Break

10:45 – 11:15

Inverse dynamics

11:15 – 11:40

Static optimization

11:40 – 12:10

Joint contact force

12:10 – 12:35

Q&A and closing

12:35 – 12:45



 

Introducing the participants of the GAMMA workshop to OpenSim 4.0.


OpenSim is supported by the Mobilize Center , an NIH Biomedical Technology Resource Center (grant P41 EB027060); the Restore Center , an NIH-funded Medical Rehabilitation Research Resource Network Center (grant P2C HD101913); and the Wu Tsai Human Performance Alliance through the Joe and Clara Tsai Foundation. See the People page for a list of the many people who have contributed to the OpenSim project over the years. ©2010-2024 OpenSim. All rights reserved.